|
The standard kit has
a 6lb spring in the waste gate. That
has a starting boost level of 6lbs -
230 hp, then the second stage of boost
is safe on pump fuel to 300 hp at 11.5
lbs of boost. (with water injection)
(second stage of boost is adjustable
with the addition of the two stage controller)
Then it's maximum performance (if you
choose to use it) is 360 hp at 20 lbs
of boost with race fuel & water
injection. As far as engine modifications;
only thing required is to lower the
compression by means of base spacer
plate.
If you want to make
as much as 430 hp then we upgrade you
to the dual ball bearing turbo that
takes you from the 360 hp to the 430
hp. In order to achieve the low 200
hp boost levels we offer a 4 lb spring
for the Tail waste gate.
| •
Velocity Turbo systems come in a
complete rigged/ready to go form. |
| •
Computer: pre-wired to map sensor,
water injection (optional) power
supply, and to fuel injectors. |
| •
Fuel system: pre-rigged to your
model/year with plug and play fittings.
Notice factory connections on hoses.
Also AN fittings that screw into
one another. |
| •
Brackets: All pre-fit and labeled
to insure proper installation |
| •
Boost controller: Pre-rigged with
proper line length and fittings |
| •
Intake Plenum: Flow tested and designed
for optimum performance, show polish
finish |
| •
This system is capable of making
efficient power in the range of
200 hp to 430 hp and with torque
levels as high as 265 lbs |
Boost levels are adjustable
while in use.
Price $5995.00
|
