ZX12 Stage 2 Piggy-back Turbo System Parts List

$ 5,995.00

1 Velocity Racing piggy-back computer with harness and map sensor.
1 Turbo header assembly with 40mm wastegate and dump pipe.
1 Turbo oil return hose.
1 Injector plates with injectors.
1 Up-pipe with 1 boot and 2 clamps.
1 Turbo oil pressure line assembly with block adaptor.
1 Fuel pump with one 90 degree #6 pushlock fittings.
1 Fuel filter.
1 Fuel pressure regulator.
1 20 amp fuse.
1 Check valve assembly.
1 Remote oil filter kit.
2 1/8 npt brass plugs tapped at 5mm x 1.50.
2 Air filter block off plates.
1 Intake block off cap and 4 self tapping screws.
2 3/8 brass T.
2 90 degree brass fittings.
1 5/16 T fitting.
1 Oil breather.
2 Adjustable cam sprockets.
1 #6 bulkhead fitting with #6 pushlock fitting.
1 #8 bulkhead fitting with #8 pushlock fitting.
6 #5 screw clamps.
16 #4 ear clamps.
2 #6 ear clamps.
4 Vacuum T's
1 Vacuum hose. (10 feet)
1 #4 blue hose. (4 feet)
1 5 1/6 FI hose. (4 feet)
1 3/8 fuel line. (4 feet)
1 Cylinder spacer (.080)
1 Boost gauge.
1 Air filter.
1 Set of Velocity and Turbo stickers.
1 Set of installation instructions.

Options

2-State boost controller. $ 100.00
Dual Ball Bearing upgrade $ 650.00
Full exhaust with carbon can $ 350.00
Multi-stage boost controller $ 500.00
Water injection assembly with tank, hobb switch, harness, filter and lines. $ 850.00
Blow off valve with weld on bung. $ 250.00
Data logger ECU with wide band O2. $ 1000.00

For more info please contact a Velocity Distributor or call us directly at

1 - 866 - 4 - 1 - SPEED